A floppy ear bunny shadowbox (11.4 x 11.4 inches)
Instructions inclueded in Zip file
A cute sugar glider layered stained-glass style shadow box
2026-07-17
491.43 KB
184
A cute sugar glider layered stained-glass style shadow box
A floppy ear bunny shadowbox (11.4 x 11.4 inches)
Instructions inclueded in Zip file
A layered shadow box featuring a floppy ear bunny
A layered shadow box featuring a floppy ear bunny
A "remarkably bright creature" octopus shadowbox (11.4 x 11.4 inches)
Instructions inclueded in Zip file
A Remarkably Bright Creature : Octopus Shadow box
.jpg)
A Remarkably Bright Creature : Octopus Shadow box
Two Penguins in a layered shadowbox (11.4 x 11.4 inches)
Instructions inclueded in Zip file
Two penguins in a stained glass style layered shadowbox
Two penguins in a stained glass style layered shadowbox
A content lemur, in a layered shadowbox (11.4 x 11.4 inches)
Instructions inclueded in Zip file
A stained glass style layered shadowbox of a lemur
A stained glass style layered shadowbox of a lemur
A serene cat, in a layered shadowbox (11.4 x 11.4 inches)
Instructions inclueded in Zip file
A cat looking serene by a window. A layered shadowbox, stained-glass style.
A cat looking serene by a window. A layered shadowbox, stained-glass style.
A whimsical Yorkie named Zoe, in a layered shadowbox (11.4 x 11.4 inches)
Instructions inclueded in Zip file
A cute take on a Yorkie named Zoe.
A cute take on a Yorkie named Zoe.
A whimsical raccoon shadowbox (11.4 x 11.4 inches, 12 sheet of cardstock, 3 pieces scrap)
A whimsical raccoon shadowbox
A whimsical raccoon shadowbox
A nice and slightly formal/sophisticated card for Fathers Day. I designed to give to my husband.
(note: the file contains an extra piece (light gray) that can be used to cut a clear acrylic piece if you use want to incorporate it. I did not in this one) The video explains it.
Based on a concept from Sam Calcott, this is a machine cuttable version for Fathers Day
Based on a concept from Sam Calcott, this is a machine cuttable version for Fathers Day
Giraffe stained glass style shadowbox project.
A layered giraffe, stained glass style. Inspired by the birth of a giraffe at the Maryland Zoo.
A layered giraffe, stained glass style. Inspired by the birth of a giraffe at the Maryland Zoo.
Hedgehog Shadowbox
Hedgehog layered stained-glass style shadowbox
A whimsical look at a hedgehog emerging from her burrow in the springtime.
Hedgehog layered stained-glass style shadowbox
A whimsical look at a hedgehog emerging from her burrow in the springtime.
This one is intricate, so be prepared for a challenge. There are 16 sheets, cut and stacked to make this one, I strongly recommend using repositionable spray adhesive with a reasonable working time, as there are a lot of small cuts to line up. I don't recommend it for beginners. As with all the files here, I made it for my own hobby, and it is not "perfect'. The pictures below show the way it looks on the computer, and the way ti turns out in real life. I used a holographic foil along with the blue in the sky background. The width of the svg as downloaded is 12.004 inches, and the sheets themselves are 11.45 inches each. to fit a 12 inch shadowbox. I do not recommend downsizing.
An imagined robin using cardstock layers to make a stained glass effect shadowbox.
An imagined robin using cardstock layers to make a stained glass effect shadowbox.
Named after a loved pet, this is a layered shadow box.
A Panda shadowbox, Stained glass style. Instructions included, but no video.
Named after a loved pet, this is a layered shadow box.
A stained glass style shadowbox of a cute panda.
A Panda shadowbox, Stained glass style. Instructions included, but no video.
A stained glass style shadowbox of a cute panda.
If you need a file with the pngs, use this:
By request, a file download that contains only the png versions of the Panda Shadowbox. Does not contain the svg files.
A Stained Glass Style Shadowbox with a Chameleon on a Branch
This Stained Glass style shadow box comprises 15 sheets of cardstock, layered with glue and (optionally) foam tape.
Instructions are included. No video.
A Stained Glass Style Shadowbox with a Chameleon on a Branch
A layered shadowbox depicting the Exodus and crossing of the Sea.
A layered shadowbox depicting the Exodus and crossing of the Sea.
This is a layered shadow box depicting the Exodus/Splitting of the Sea. Assembly is straightforward, just layering on the sheets with foam tape or glue.
This is my first attempt at designing these, and I have more to learn. The cuts can get rather intricate, so be careful when removing from the cutting mats.
I used white glitter for the "white foam" cardstock. I think it would have looked nice to have shimmer or glitter sheets for the other water as well, but I didn't have the colors.
I used gold foil to shadow the silhouettes of the people.
This dreidel can be used as a gelt/snack/small gift box or can be used as a toy. Assembly video available.
This is an easy Chanukah project. The dreidel box can be used to hold gelt, candy or a small gift. Or, you can glue it together and use it as a big dreidel.
After uploading to your cutting program, ungroup if necessary and then delete the yellow frame/labeling before cutting.
An assembly video is available here: https://youtu.be/NaNtM7pPBsA
This dreidel can be used as a gelt/snack/small gift box or can be used as a toy. Assembly video available.
A new version of the card with some new popup features to add more dimension. New mechanism for locking into place after opening.
Assembly video at: https://youtu.be/wBHhYnUb4iA
This is a new version of the claw card with additional popup features.
.svg and .studio3 versions are included
This is a new version of the claw card with additional popup features.
.svg and .studio3 versions are included
A simple Honey Jar to go with the apple...
A simple Honey Jar that I made to go with the apple bowl for Rosh Hashana
A simple Honey Jar to go with the apple...
A very simple apple bowl. This version lets you choose either cut or scored fold lines..
You will need to duplicate some pieces.
Here is a simple apple shaped bowl. It's pretty lightweight, so don't plan on filling it with pennies. No video, and instructions are pretty basic. If you've built similar projects in the past, it should be straightforward. I made this as part of a Rosh Hashana project and was asked to share it. File has been updated.
A very simple apple bowl. This version lets you choose either cut or scored fold lines..
You will need to duplicate some pieces.
A re-design of the Teacher's Desk. (This one uses drawer supports rather than stacked outer/inner matchbox construction.)
An assembly video is available at https://youtu.be/CI9iGkK-1CE
This is a revised version of the Teacher's Desk An assembly video is available.
A simple desk with functional drawers that can hold a gift card and small candies, etc. Great back to school gift for a special teacher.
No video, but written instructions are in the zip file.
(Version 1.1 (Aug 12,2022) added a missing decorative desktop piece and splits the desktop edge decorative pieces so they can be cut on letter size paper. )
Teacher's Desk 1.1 A teacher's desk with functional drawers. The center drawer can hold a gift card. Maybe candy in the others? Chocolate?
Teacher's Desk 1.1 A teacher's desk with functional drawers. The center drawer can hold a gift card. Maybe candy in the others? Chocolate?
This file has been replaced with a newer version. See Claw Machine Popup Card V8
A simple jack in the box card powered by a rubber band. Uses a rubberband that is 7" long when cut.
A fun simple card that pops up a jack-in-the-box (or your favorite picture) when opened. Powered by a rubber band.
Assembly video now available at https://youtu.be/WvK6gM73U3A
Sorry no instructions with this one.... there's a pdf that give some hints as to what the pieces are.
A three-story house. Also includes some files to make miniature furnishings if you are so inclined. Or you can use it as a gift box. The stories can separate. The bushes are made with moss glued on half styrofoam spherese, btw.
These files accompany the tutorial on using the custom Inkscape extension "Extruder" and make a cute little house-shaped box
Box or bank -- a piggy shaped craft just for fun.
Included pdf with construction notes, .svg version, and .studio version for Cameo users.
Just for fun, a piggy shaped box or piggy bank with back flap.
Box or bank -- a piggy shaped craft just for fun.
Included pdf with construction notes, .svg version, and .studio version for Cameo users.
A simple box card with a garden scene. Layout width: 11.416 inches.
Assembly Video at https://youtu.be/Y1CDGN0ezS4
3D card folds flat.
3D card folds flat.
It appears that the latest update (6.9.163) for Windows Desktop has introduced some errors handling svg files. This can cause (sometimes huge) sizing errors on uploading projects.
I'll try to add in some dimensions for re-sizing, and will put the "width" of the project on the project page as I get to them. If you don't see it there yet, you can post in the facebook group and I will do my best to get it for you.
Others may even import at a scale that DS can't handle and prevent resizing. I've notified them of this problem,
A list of the correct sizing is below:-- i.e. if you were to select-all the objects in the project, this is the width in inches. (Be sure to resize proportionately)
Read more: File layout Size (Cricut users especially, please read)
A cookie jar (with an optional false bottom)
About 11" tall and 7" wide.
Here's a cookie jar -- maybe for Dad on Fathers Day?
Instructions are on pdf. Width should be 43"w by 25" high.
A cookie jar (with an optional false bottom)
About 11" tall and 7" wide.
This aquarium needs no cleaning! See the article for basic instructions.
This aquarium needs no cleaning! See the article for basic instructions.
This is a fun card for fish lovers. The zip file contains the print and cut images to complete it. The fish are swimming at different depths. Looks cool.(sorry no videos for now.... I'll try to get to that.) Legend and really rudimentary instructions follow.. Note: the size of the layout when all pieces are selected should be 26.247 inches wide. Assembly video is here. Please download the latest version, as a few changes were made.
Coaster Set - the file has all the designs in the download.
Project width: 11.5" for each set
This is an easy project. Cutting takes a while, but assembly is generally about 10-15 minutes.
Assembly video at: https://www.youtube.com/watch?v=4igGBtPeUeo
How I designed these: Video at https://www.youtube.com/watch?v=RU-S8VU5em8
Assembly Video at https://youtu.be/6n_9od4dmuM
This is a small roundish vase. Very simple in shape. Pictured with the Scrapflowers/Suzia flowers.
This is the vase that the Scrapflowers/Suzia are pictured in.
A simple flower that can easily be made with cardstock scraps.
This is a simple flower not particularly copied from nature that is easy to craft using leftover cardstock.
A couple of stems you can add to your arrangements for fill.
A pretty lily to decorate a table or boxed gift.
Instructions are included in .pdf (no video)
Day Lily v3 
This is a simple Day Lily flower. It is not difficult to do, and suitable for any crafter level.
Assembly Video at https://youtu.be/uz-OWZBWv24
Gerbera Daisy to brighten you days.
A larger blossom
A classic shaped vase
Written instructions only. Use the separate version if you need to print decorative paper on letter size pages, or want pieces separated.
See notes below: Width 36.2
This is the layout version of the guitar project. Fewer pieces to attach, 12x12 layout
This is the separate version of the guitar project. More flexibilty in layout, but more pieces to attach.
Assembly NOTES AND VIDEO LINKS follow:
Milk Can v5 
Simple milk can for flowers,.
This file has both the solid and cut scores. (You''ll delete what you don't need) Basic instructions included.
NOTE: The largest piece should be about 11.4 inches high when sized correctly.
Sunflower V6 
3-D Sunflower with leaves
Project width 10.575"
Cut score lines
A street clock or lamp -- cut score lines
Solid score Lines
A street clock or lamp -- cut score lines
Some cups to use with the pitchers -- or just a simple vase or pencil holder.
Pitcher is about 8.5 inches tall. Downloads include assembly info/instructions.
Solid score lines :
Cut Score Lines:
Stained Glass lamp, this one has cut score lines.
Scalloped leaf filler for floral arrangements
Flowery filler.
Greenery 1 
Based on a design from The Noun Project this is small greenery filler.
Chocolate Kiss Box 20-3 
Chocolate kiss shaped box. Opens at the bottom to fill with your favorite chocolate kisses.
UPDATE: 3:45pm 07/18/2019: Updated zip to include a missing piece, and
...Large rose (shown in pink)
Beast Beauty Rose by The SerialCrafter
Medium rose (shown in yellow)
This is a slightly smaller and lighter version of the larger Beast Beauty rose. It is approximately 3/4 the size, about 3.25 inches in diameter when assembled.
Assembly Video is here: https://youtu.be/27gIEQqXB7o
Zinnia Flower
When live fish are too much trouble....
Version 2 -- more Design Space Friendly.
